Race Glaze Signature Pre WaxPro (250ml)

One step swirl remover & paint cleanser, with heavy grade diminishing abrasives. Similar cut to Menzerna 203S. Removes medium to heavy swirls & oxidation by rotary or DA. Revives and restores faded paintwork of all types. May need a finer finish with Cut & Cleanse after if worked hard. Go straight to waxing.

• Professional pre-wax cleanser , strong cut
• Signature Pre-Wax Cleanser with heavy grade diminishing abrasives
• Removes heavy swirls & oxidation by rotarty polishing machine or DA                        Race Glaze Pre-Wax PRO
• Revives and restores faded paintwork of all types
• Go straight to waxing
• For heavy correction - permanently
• Ensures surface is ready to accept wax without a wipe down - a true 'one-step' product
• Saves times over using separate products
• Body shop safe
• Recommended prior to use of Signature waxes 42, 55, 4x4 and Black Label waxes, or any of your choice
• Most economical in 1 litre size
  

Directions:

By hand (though not recommended):
Spread evenly on dry foam or microfibre/cotton pad, applying to paintwork in straight lines with light pressure initially to avoid trails. Increase pressure over approx. 60cm squares. Buff off when clear to check results, repeat as necessary. Use Signature Pre-Wax Cut & Cleanse to remove any hazing which is more likely to occur after hand use.

By rotary or DA Polisher:
Load pad evenly, speed 1-2 initially to allow abrasives to break down, work with medium pressure at speed 5, final finish on speed 6. Apply wax.